900 Veritas series

For installation on the suction side of the fuel system. Flow meter with chrome steel bracket, AIC-VORTEX BREAKER, fuel filter and 10m connection cable to the remote totalizer. These flow meters are specially designed for vehicles equipped for fleet-management-systems, or for registration of cumulated fuel consumption. Pulse signal: rectangular, 50% duty-cycle, Supply voltage 8 -28 VDC.

Model/Designation

904 VERITAS For diesel engines up to 220 KW (300 HP) 200 ppl
908 VERITAS For diesel engines up to 515 KW (700 HP) 80 ppl

4000 Veritas series

For installation on the suction side of the fuel system. Highest measuring accuracy. Flow meter with chrome steel bracket, AIC-VORTEX BREAKER, fuel filter and 10m connection cable to the board computer. Pulse signal : rectangular NPN collector, pulse width = 0.6 ms. Appropriate for all injection systems, incl. EDC-EHAB/ELAB, injector-units and "common-rail" systems (not for Cummins HPI with "Open-Injector" systems).

Model/Designation

4004 VERITAS For diesel engines up to max. 220 KW (300HP) 1000 or 2000 ppl
4008 VERITAS For diesel engines up to max. 515 KW (700HP) 800 ppl

1000 series

Special version for very compact application under engine hood, where 900 or 4000 series cannot be mounted. Flow meter with high resolution pulse emitter for Diesel engines with distributor injection pump, or "common-rail" injection systems. Online Diesel filter must be mounted before flow meter. Suitable also for gasoline engines with L-Jetronic, Motronic or similar injection systems.

Model/Designation

1204 LC 200    For engines up to max. 220 kW (300HP) 200 ppl, pulse rectangular, 50% duty-cycle
1208 LC 80      For engines up to max. 515 kW (700HP) 80 ppl, pulse rectangular, 50% duty-cycle
1204 HR 2000 Same as 1204, but suitable for instantaneous reading 2000 ppl, pulse rectangular.
                                    NPN open collector, pulse width 0.6 ms
1208 HR 800  Same as 1208, but suitable for instantaneous reading 800 ppl, pulse rectangular.
                                    NPN open collector, pulse width 0.6 ms

FS series

For installation on the pressure side of the fuel system. Flow meter in Brass or Carbon Steel housing, for up to 25 bar and 150°C applications. Can be used for diesel, extra light fuel oil, MDO, HFO. These flow meters are specially designed for large engines from 1600 up to 24000 KW, stationary engines, locomotives engines, ships engines. Delivered with 10m connection cable to the board computer. Pulse signal: rectangular NPN collector, pulse width = 0.6 ms.

Model/Designation

FS–15 For diesel engines up to 1600 KW (2200 HP) 416 ppl, flow range from 15 to 600 l/h
FS–20 For diesel engines up to 4000 KW (5500 HP) 138 ppl, flow range from 30 to 1500 l/h
FS–25 For diesel engines up to 8000 KW (11000 HP) 100 ppl, flow range from 75 to 3000 l/h
FS–40 For diesel engines up to 24000 KW (32000 HP) 30 ppl, flow range from 225 to 9000 l/h

888 Instruktor

Instrument for live testing while driving. Can be mounted temporary for a short or longer testing period. For installation on the suction side of the fuel system. Highest measuring accuracy. Flow meter with chrome steel housing, fuel filter and 10m connection cable to the board computer. Pulse signal: rectangular NPN open collector, pulse width = 0.6 ms. Appropriate for all injection systems, incl. EDC-EHAB/ELAB, injector-units and "common-rail" systems (not for Cummins HPI with "Open-Injector" systems).

Model/Designation

884 Instruktor For diesel engines up to max. 220KW (300HP) 2000ppl
888 Instruktor For diesel engines up to max. 515KW (700HP) 800ppl

5004 Fuel Flow Master

For stationary measuring during power test on Roller- or Engine test benches. Flow meter with heat exchanger, circulation pump and fuel filter assembled on a stainless steel support. Appropriate for all injection systems, incl. EDC-EHAB/ELAB, injector-units and "common-rail" systems (not for Cummins HPI with "Open-Injector" systems).

Model/Designation

5004 FFM For diesel engines up to 515 KW (700HP) 2000 ppl

6000 Swissline Uniflowmaster series

For stationary measurements during engine tests, or "on board" during road-test or driver instruction. Flow meter with heat exchanger, circulation pump and fuel filter assembled on a stainless steel support. Appropriate for all injection systems, incl. EDC-EHAB/ELAB, injector-units and "common-rail" systems (Not for Cummins HPI with "Open-Injector" systems).

Model/Designation

6004 For diesel engines up to 515 KW (700HP) 2000 ppl
6008 For diesel engines up to 735 KW (1000HP) 800 ppl

FS25 Big Brother

Special instrument, integrated and mounted on a complete stainless steel trolley, for large engine tests (up to 8000 KW / 11000 HP) Flow meter in Brass housing, for up to 16 bar and 90°C applications. Can be used for diesel, extra light fuel oil or MDO. This flow meter is specially designed for testing application, appropriate for all injection systems, incl. EDC-EHAB/ELAB, injector-units and "common-rail" systems. Flow meter with heat exchanger and circulation pump 4800 l/h / 0.55 kW / 220/240 VAC 50/60 Hz. Delivered with 10m connection cable to the board computer. Pulse signal: rectangular NPN collector, pulse width = 0.6 ms. Big Brother can be customized to suite other engine sizes. Contact BlueFlow Americas for more information.

Model/Designation

FS-25 BIG BROTHER For diesel engines up to 8000 KW (11000 HP) 100 ppl, flow range from 75 to 3000 l/h.

Remote Totalizer

Remote totalizers are suitable for application for fleet-management systems, not for instantaneous flow monitoring. LCD 8 digits up to 9 999 999.9, programmable, for pulse counting. Display in Liters, US-Gal. or Imp.-Gal. Stainless steel housing, 75 x 60 x 38 mm. Can be added as display with the following meters: 904, 908, 1004, 1008

Model/Designation

RT/VR      Without reset to zero
RT/VR/R   Reset to zero by reset button
RT/VR/KS Reset to zero by key switch

Accessories

All the flow meters can be equipped with different accessories like:

Fuel Hoses
Filters
Mounting Kits
Connection Kits
Connection Cables
Transport Cases
And more…

Please contact BlueFlow Americas for more information on different accessories and how to equip the flow meters to suit your specific needs.

 Example  of  companies  using  our  flow  meters: